• Making Hand
• Length customizable
• Steel

Introducing the short U frame racer and flat 1in (25mm)

If you want to install a seat back record or edit shape your bike, this is perfect .

U frame is a part for attachment to the rear of the bike to close part.

This enables more aesthetic the back of the bike.

U frame back motorcycleis made manually. Steel is untreated. This model measures 1 in (25 mm) in diameter.

Note the width is not measured but the spacing external width as a distance wider.

The model is available in width: 8.07, 9.25, 9.84, 10.62 in (205, 235, 250 and 270 mm).

U frame cafe racer 1 in (25mm) flat is perfect to give a good back line to the bike.

U frame back motorcycle conveniently installed by being welded to the frame or to the original U frame.

Here’s an illustration of a short U frame:

The dimensions expressed correspond to the following dimensions:

Note:The width is expressed as the external width, distance between the ends of each side.

Description:

Material: steel

Color: Raw

Diameter: 1 in (25 mm)

Length: +/- 6.29- 9.44 in (16-24 cm)

Note:

The U frame is brut, it may be made in the surface rust. This does not prevent its proper use.